i-supra.com    i-supra.com    www.i-supra.com  Hop To Forum Categories  BPU™ Forum    question about Down Pipe
Go
New
Find
Notify
Tools
Reply
  
-star Rating Rate It!  Login/Join 
Member
Posted
are there other sizes for down pipes other than 3". I know that there are none bigger than 3", but what about smaller? Im trying to figure out if my supra has a down pipe. It doesnt seem to be a 3" pipe though, but it has a cat-back. The car also has a boost controller, but no boost gauge. any help would be greatly appreciated, if anyone has a pic of a cat, or downpipe on their car that wouldnt mind showing me, it would be a great help!

thanks.
 
Posts: 78 | Registered: October 06, 2002Reply With QuoteEdit or Delete MessageReport This Post
Member
Picture of TRBO2NR
Posted Hide Post
Does your car still have the Cats? If you don't know what they look like go to this sitehere. Hope this helps.

Near future 94' SupraTT owner!!
 
Posts: 79 | Location: Kewaskum, WI | Registered: December 20, 2002Reply With QuoteEdit or Delete MessageReport This Post
Member
Posted Hide Post
3 inch downpipes are the norm that most people upgrade to. Anything less would be close to the restriction of the stocker. Downpipes are most certainly available larger than 3 inches. A little searching will find 3.5" and 4" downpipes to choose from. These are only necessary on high horsepower supras (650+hp).
 
Posts: 6 | Registered: September 01, 2002Reply With QuoteEdit or Delete MessageReport This Post
Mid-level Member
Picture of jltcat
Posted Hide Post
I have a tanabe 4" downpipe stainless steel. It eliminates the cat however

AEM Stand Alone EMS, Airinx Air Intake, Tanabe Super Racing Medallion, Tanabe Downpipe, Greddy Profec-B Electronic Boost Controller, HKS Super Sequential Blow Off Valve, Denso Iridium 22K Spark Plugs, Ractive Front Strut Tower Bar, Cusco Rear Strut Tower Bar, Greddy Turbo Timer, Greddy Boost Gauge, Nordskog A/F Gauge, Greddy EGT Guage, Solenoid Resistor Heat Shield Hand Polished On A Buffing Wheel And Clear Coated, Nitto 555 Extreme ZR, Volk LE37K 18X8.5 Front, Volk LE37K 18X9.5 Rear, External Transmission Filter, B&M Transmission Cooler With Fan ,New Titanium Retainers, HKS Camshafts 264 Intake 272 Exhaust, Greddy 3 Row Intercooler, MSD DIS4 Ignition, APR Racing Stainless Steel Head Studs, HKS Layer Metal Head Gasket, Custom Head Ported and Polished By Jay's Performance, Optima Yellow Top Dry Cell Battery, Panasonic 7200 In Dash DVD Player

Web:
www.cardomain.com/id/jltcat

"I'm not going there to die. I'm going there to find out if I'm really alive."
 
Posts: 403 | Location: Northern New Hampshire | Registered: August 04, 2002Reply With QuoteEdit or Delete MessageReport This Post
Member
Picture of sleepwalker
Posted Hide Post
Look under the car for the two cans one going to the turbo manifold and one going to the cat back. They are highly restrictive! Tanabe I believe makes the biggest downpipe but can't go wrong with the rod millen dp.

no matter how much chaos life bings me just knowing I've got 285/30's is very theraputic.
 
Posts: 29 | Location: manwhore usa | Registered: May 26, 2003Reply With QuoteEdit or Delete MessageReport This Post
Member
Posted Hide Post
You may want to try this, it offers a fantastic HP increase, more than I have seen on any other downpipe.

http://store.yahoo.com/supra/stainsteeldo.html
 
Posts: 62 | Location: Hitchin, UK | Registered: May 30, 2003Reply With QuoteEdit or Delete MessageReport This Post
 Previous Topic | Next Topic powered by eve community  
 

i-supra.com    i-supra.com    www.i-supra.com  Hop To Forum Categories  BPU™ Forum    question about Down Pipe

© YourCopy 2001