I have a 92 supra TT 1g-gte but its has an automatic tranny. I want to know which 5-spd tranmission will work for that engine. If anyone could let me know that would be awesome.

the W58 tranny will fit. it was offered on the car.

I have never swapped out a tranny. Would the switch be a fairly easy one or will it just be a hassle

well im in the middle of a auto to 5 spd swap right now. its a pain but it will be worth it. i heard the auto tranny can only handle arround 300hp, the W58 can handle a litte over 400hp so depending on what your power goals are. if you do decide to do the swap make sure you have everything you need before you start.

Is there any clutch kits or anythin for cheap that comes wit everythin i need like the pedal and such...if you know what i mean

you usualy have to get the parts off another car thats what i did. i know horsepowerfreaks.com haves good prices on parts. and its hard to get parts form toyota a lot of them are unavilable. i had a buddy of mine give me everyting i needed for $200. but its hard to finde a deal like that. if you need a list of the parts you need let me know.

yahh a list of parts would really be good if you can make one up for me.

ok you would need.
- W58 Transmission
- Flywheel
- Clutch
- Pressure Plate
- Driver side L bracket
- Possably? Crossmember
- Driveshaft
- Transmission Mount
- Clutch Pedal Assembly
- Break Pedal Assembly
- CLutch Master Cylinder
- CLutch Slave Cylinder
- Clutch Lines
- and the Shifter Assembly
thats all i can think of right now. if you have anymore questions feel free to ask.

Alright thanx, now i can go start my hunt for the parts i need and empty my wallet tryna do this haha

www.4cefed.com

-shaeff

My automatic tranny went out so im converting as well, wont the R154 work to? I heard it was a more rugged tranny. Also could the Clutch Pedal Assembly be pulled off any other cars like an r-x7 or 280z same with the clutch lines arnt they pretty universal?

i'm putting a n/a tranny in my 7mgte because my old tranny went
and the kick down cable is to short but the cabel of my old one got lost so, i bout a new one at toyota. how do i ajust it it came with the metel cip out so when i ajust it i would be abol to clip it on but were do i clip it. sorry for the long story and sorry if it's a dumb question. thanks for your time

This message has been edited. Last edited by: NUNI1990,