Moderators: Figgie
Go
New
Find
Notify
Tools
Reply
  
-star Rating Rate It!  Login/Join 
Member
Picture of mn_supra_boi
Posted
hey guys ive been haveing this problem off and on and i dont kno what it is, sometimes when iam driveing the car seems to rumble like my tires are bad but when i stop and go agian its fine it only happens when i shift at 3k rpms but if i shift at 2.5k its fine all the way to 80+ mph
 
Posts: 104 | Location: mpls | Registered: August 17, 2007Reply With QuoteEdit or Delete MessageReport This Post
Member
Picture of 90mk3
Posted Hide Post
could be your pressure plate of throw out bearing going out. but that sounds like a weird problem.
 
Posts: 103 | Location: lafayette, la | Registered: June 25, 2006Reply With QuoteEdit or Delete MessageReport This Post
Moderator
i-Supra Journeyman
Posted Hide Post
Check your differential oil, and transmission oil. Those are the easy things.

Next, try pulling the inspection plate from the transmission, and look for loose PP bolts, etc...

Does it happen when applying the brakes?
 
Posts: 3064 | Location: Upstate NY | Registered: April 02, 2003Reply With QuoteEdit or Delete MessageReport This Post
Member
Picture of mn_supra_boi
Posted Hide Post
thanks ill check the fluids to make shur, when brakeing it dosent rumble only when iam driveing but like i said its a off and on thing one min ill be fine the next it will be shakeing like a earthquake, could it be something wrong with my suspension or my tranny(owner before me just put a new clutch in)
 
Posts: 104 | Location: mpls | Registered: August 17, 2007Reply With QuoteEdit or Delete MessageReport This Post
Member
Picture of 90mk3
Posted Hide Post
did he put the stock clutch in or aftermarket?
 
Posts: 103 | Location: lafayette, la | Registered: June 25, 2006Reply With QuoteEdit or Delete MessageReport This Post
Member
Picture of mn_supra_boi
Posted Hide Post
he told me that is was just a new stock clutch that he bought from Advance auto stores
 
Posts: 104 | Location: mpls | Registered: August 17, 2007Reply With QuoteEdit or Delete MessageReport This Post
Member
Picture of 90mk3
Posted Hide Post
you should ask him who did the work. mabey they did something wrong when installing it.
 
Posts: 103 | Location: lafayette, la | Registered: June 25, 2006Reply With QuoteEdit or Delete MessageReport This Post
Member
Picture of mn_supra_boi
Posted Hide Post
he told me that he did it him self and he said he did everything right so i dont kno do u guys think i should got get a new one and get it done at a shop, iam alot thinking it might be my drive shaft it might be loose or some thing
 
Posts: 104 | Location: mpls | Registered: August 17, 2007Reply With QuoteEdit or Delete MessageReport This Post
Member
Picture of 90mk3
Posted Hide Post
drive shaft would make noise at highway speeds not just at a certain rpm. bring it to a tranny shop and have them look at it thats my advise.
 
Posts: 103 | Location: lafayette, la | Registered: June 25, 2006Reply With QuoteEdit or Delete MessageReport This Post
Member
Picture of mn_supra_boi
Posted Hide Post
thanks Big Grin will do
 
Posts: 104 | Location: mpls | Registered: August 17, 2007Reply With QuoteEdit or Delete MessageReport This Post
Moderator
i-Supra Journeyman
Posted Hide Post
Specifically, the carrier bearing in the middle of the front and rear shafts. Wink
 
Posts: 3064 | Location: Upstate NY | Registered: April 02, 2003Reply With QuoteEdit or Delete MessageReport This Post
Member
Picture of mn_supra_boi
Posted Hide Post
kk thanks
 
Posts: 104 | Location: mpls | Registered: August 17, 2007Reply With QuoteEdit or Delete MessageReport This Post
 Previous Topic | Next Topic powered by eve community  
 


© YourCopy 2001