the turn signals were working fine when i last checked. i then removed the dash to wire in a kill switch, which btw works fine. then i put the dash back together to find that the turn signals and the four-ways dont work at all. the electrical i did had nothing to do with the turn signals. would any of the plugs on the dash cause them to not work, if it wasnt plugged in right. if so which one would it be.

When you took off the top dash piece that has the Hazard button on it, did you make sure you reconnected the hazard plug? I made the mistake once of missing that and had the same problem, no signals... Check that connection out, chances are that is your problem.